Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y optimizar su navegación. Si continúa navegando, consideramos que acepta nuestra política de cookies.

Beyem Fix

Beyem Fix

Ready to use, dispersion adhesive, D1E, for tiling in interior walls.

About this product

BEYEM FIX is a ready-to-use, cement-free, dispersion adhesive, aqueous dispersion copolymer based formula adhesive, with selected granulometry mineral loads and state-of-the-art additives. Particularly suitable for fixing tiles over old wall tilings.

Benefits
  • Ready-to use.
  • Great flexibility. Highly deformable.
  • High adherence.
  • Easy-to-use.
  • Allows for fixing over old wall tilings in good condition.
  • Extended open time.
  • High adjustability time.
  • Great versatility of substrates, including deformable.
Use

Laying of ceramic claddings, on all types of substrates, in interior claddings. Suitable for small and medium-size ceramics with medium, low or zero porosity. Gypsum board tiling, installation of polystyrene boards and other insulation material boards, wall tiling on existing ceramic tilings, ceramic installation on deformable supports and fixing on plaster surfaces.

Substrates

BEYEM FIX is suitable for:

  • Conventional cement-based and mortar render substrates.
  • Concrete.
  • Gypsum and gypsum wall boards.
  • Brickwork or ceramic blocks.
  • Hard natural stone, plaster and wood. 
  • Painted surfaces (provided the paint is properly adhered to the substrate). 
  • Old wall tilings (tile on tile).
Preparation of substrates

Substrates must be clean, compact and  free of substances that reduce adhesion such as dust, oil, grease and with no loose material. Uneven areas must be corrected with suitable smoothing and finishing products. Substrates must be free from any rising damp and have already completed the curing period of hygrometric  shrinkage.

Instructions for use

 

Mix BEYEM FIX until complete homogenisation. Spread the paste onto approximately 1m2 small area  using  a 4x4 mm notched trowel or a 4mm sawtooth trowel to regulate the thickness. Bed the tiles firmly into the adhesive with a slight sliding and/or twisting action, to ensure a good contact and complete coverage.

Cautions and recommendations
  • Do not use on flooring or metals.
  • Do not apply below 5ºC or above 30ºC.
  • Do not apply in exterior situations.
  • Do not apply in broad daylight or on hot surfaces.
  • Do not apply using a notched trowel greater than 4 mm.
  • Leave joints between tiles with a minimum width of 2mm.  Grout with BEYEM JUNTA UNIVERSAL/BEYEM JUNTA EXTRAFINA.
  • Comply with expansion, division and perimeter joints.
  • Do not apply onto surfaces where there is risk of continuous exposure to humidity.
  • The temperature, ventilation, absorption of the substrate and various covering materials may vary the adhesive workability/adjustability and curing times.
  • When applying BEYEM FIX on low absorbent substrates, the hardening of the paste will be slower, it is recommended not to grout until it has hardened.
  • Do not apply on non-absorbent tiles on non-absorbent substrates.
Technical data

Product identity. Properties of mixture and application data

Appearance

Thixotropic paste

Color

White

Density of the mix

≈ 1700 Kg/m3

Grading

0-200 µm

Adjustability time

≥ 40 min

Grouting

≈ 24 h – 48 h

Coverage

≈ 1,5-2,0 Kg/m2  per mm thickness

Tariff code

3506.91.00

Final performances

 

Type

D1E

Initial shear adhesion strength

≥ 1,0 N/mm2

Shear adhesion strength after heat ageing

≥ 1,0 N/mm2 

Open time

30 min

Commissioning time

≈ 7 days

Packaging

BEYEM FIX is packed in 5 Kg and 25 kg plastic  pails.

Storage:  when stored unopened in a cool dry place, shelf life is 12 months from date of manufacture.

Cleaning tools

Tools can be cleaned easily with water  before the product hardens. Hardened product can be remove only mechanically.

Project specification

Laying of ceramic tiles will be carried out using the organic adhesive that comes in a ready to use paste Beyem Fix, manufactured by the company Rodacal Beyem, Class D1E as per the EN 12004 Standard. The substrate must be sound, clean, dry, free of friable parts, completely hardened and its shrinkage completed. The expansion, division and perimeter joints must be respected. Ceramic tiles must be laid with joint-gap spacers with a width of ___ mm.

Health and Safety

For further and complete information about the safe use of our product please refer to our latest version of the Safety Data Sheet, which is available upon request.

Disposal of the product and packaging must be in accordance with current legislation. This is  responsibility of the final product user.

Certifications

Technical Data Sheet

Ficha de Seguridad

Declaration of Performance

Certificate of Factory Production Control

Certificate of Quality Management System ISO 9001

Certificate of R+D+i Management System UNE 166002

Up Send to a friendSend to a friend Go backGo back