Este sitio web utiliza cookies propias y de terceros para mejorar nuestros servicios y optimizar su navegación. Si continúa navegando, consideramos que acepta nuestra política de cookies.

Beyem Adiflex

Beyem Adiflex

Multifunctional additive for cementitious tile grouts.

About this product

BEYEM ADIFLEX is a multifunctional state-of-the-art additive with polymer and special organic additives. BEYEM ADIFLEX is specially designed to improve the ultimate performance of tile grout mortars.

Benefits
  • Increases life of the tile joints.
  • Enhnaced adhesion.
  • Confers greater compactness.
  • Excellent abrasion resistance.
  • Decreases absorption and porosity.
  • Increases flexibility.
  • Higher  resistance to freeze-thaw cycles.
  • Easy dosing.
Use

Multifunctional additive for cementitious joints. BEYEM ADIFLEX improves the properties of grouting mortars to which it is incorporated, beyond the most demanding values ​​contemplated in regulations, while providing new benefits to these mortars. The improvements provided by BEYEM ADIFLEX allow to obtain much more durable and versatile joints:

Increased abrasion resistance. Increased adhesion (it is possible grouting pieces of very low absorption more easily: porcelain tiles and natural stone). Increase of the compactness: it diminishes the porosity and absorption (increasing the resistance to the usual products of cleaning: oils, lye, detergents, etc.). Increased flexibility of grouting mortar, improving the performance of the tile grout in more applications and substrates (balconies, terraces, natural stone, porcelain tiles, ...) and providing to the tile grout, transversal deformation category S1, increased resistance to ice-thaw cycles of grouting mortars.

Substrates

BEYEM ADIFLEX is suitable for:

  • Cement  based substrates.
  • Cement tile adhesives.
Preparation of substrates

Substrates must be clean, compact and  free of substances that reduce adhesion such as dust, oil, grease and with no loose material. Substrates must be dry and free from any rising damp. Empty joints must be dry and clean in all their length and depth. Wet the joints with clean water before application when using very porous ceramic tiles in high temperatures and in the presence of wind. Before starting the application, temporary porefiller BEYEM TAPA protects matt, porous and non-porous ceramic from possible pigment stains.

Instructions for use

Add BEYEM ADIFLEX to the grout mortar BEYEM JUNTA UNIVERSAL  and dry mix both products. Add a bag of BEYEM ADIFLEX 500 grams per 5 kg of tile grout mortar.  Mix the grout mortar  with water until a creamy lump-free consistency (approx.  1.5 litres of water per 5 kg bag) is obtained. The paste obtained will be applied as the usual way specified on the bag or in the grout's data sheet.

Cautions and recommendations
  • Do not overdose BEYEM ADIFLEX.
  • Do not apply on plastic, metal or wood.
  • Do not apply below 5ºC or above 30ºC.
  • Do not apply when there is  risk of frost, rain, strong wind or direct sunlight.
  • On hot days the flanks of the joints must be moistened with clean water to ensure proper hydration of the tile grout
  • In outdoor, joins should be protected from rain until completely drying of grout mortar.
  • Adhesive should normally be left for at least 24-48 hours before grouting.
  • Use BEYEM DESIN  to clean up stained tiles (wait at least 15 days after application). Make sure the product does not damage the tile. Do not use on grouted joints.
  • If the grout is required to be completely impervious to water  or chemically resistant, use BEYEM JUNTA EPOXY.
Technical data

Product identity. Application data.

Type

Powder additive

Appearance

White powder

Bulk density

≈ 800 Kg/m3

Dosage

500 gr per 5 Kg of BEYEM JUNTA UNIVERSAL

Final performances of tile grout + BEYEM ADIFLEX

Abrasion resistance

≤  500 mm3 

Water absorption after 30 min

≤ 1 g

Water absorption after 240 mm

≤ 2,5 g

Transverse deformation

S1

Packaging

BEYEM ADIFLEX is packed in boxes  containing 4 bags of  0,5 Kg per bag.

Storage:  when stored unopened in a cool dry place, shelf life is 12 months from date of manufacture.

Cleaning tools

Tools can be cleaned easily with water  before the product hardens. Hardened product can be remove only mechanically.

Project specification

Grouting of ceramic and porcelain tiles, marble or natural stone, must be carried out with a mould-resistant, high abrasion resistance and  low water uptake tile grout mortar  compliant with EN 13888 - class CG2 AW, such as Beyem Junta Universal manufactured by Rodacal Beyem company. Joints must be free from traces of adhesives and flaky parts. Use a spreader or hard rubber float to apply the joint grout and suitable sponges and clean water to clean joints on completion. Joints of ____ mm width and tiles ____ x ____ cm in size will lead to an average coverage of ≈ ____ kg/m2. Existing joints must be respected and elastic fractionizing and perimeter joints must be created. 500 gr of Beyem Adiflex will be dosed for every 5 Kg of Beyem JU.

Health and Safety

For further and complete information about the safe use of our product please refer to our latest version of the Safety Data Sheet, which is available upon request.

Disposal of the product and packaging must be in accordance with current legislation. This is  responsibility of the final product user.

Certifications

Ficha de Seguridad

Technical Data Sheet

Certificate of Quality Management System ISO 9001

Certificate of R+D+i Management System UNE 166002

Up Send to a friendSend to a friend Go backGo back