Beyem Junta Extrafina

Beyem Junta Extrafina

Fast drying, polymer-modified tile grout mortar (CG2 AW) for joints up to 4 mm. Smooth finish. Protected with Sanitized®.

About this product

BEYEM JUNTA EXTRAFINA is a fast drying, polymer-modified, colored  tile grout mortar formulated with cement, selected aggregates, special additives, synthetic resins and mineral pigments. Especially suitable for joints up to  4 mm.

Indoor environment quality. Classifed as  A+ class according to Décret nº. 2011-321 (France). 

Benefits
  • Hygienic  tile joints protected with Sanitized®.
  • Resistant to mildew stains
  • Prevents formation of mildew spores that are
  • known allergens.
  • Fresher longer. No more musty mildew odor.
  • Wide range of colours. Stable and long lasting color.
  • High hardness. High abrasion resistance. Low water uptake.
  • Easy to use. Easy to clean. No scratching.
  • Foot traffic: 24 h
  • Very low VOCs  emissions. 
Use

Grout mortar for extra-fine and hygienic tile joints up to 4 mm. Suitable for all types of ceramic tiles, natural stone, glass mosaic, marble , etc. For interior and exterior situations to walls and floors.  Ideal for use in wet areas (swimming pools). Especially suitable for grouting  rectified porcelain tiles. Allows to renew damaged and eroded tile joints.

Substrates

BEYEM JUNTA EXTRAFINA is suitable for:

  • Cement  based substrates.
  • Cement tile adhesives.
Preparation of substrates

Substrates must be clean, compact and  free of substances that reduce adhesion such as dust, oil, grease and with no loose material. Substrates must be dry and free from any rising damp. Empty joints must be dry and clean in all their length and depth. Wet the joints with clean water before application when using very porous ceramic tiles in high temperatures and in the presence of wind. Before starting the application, temporary porefiller BEYEM TAPA protects matt, porous and non-porous ceramic from possible pigment stains. 

Instructions for use

Mix manually of mechanically BEYEM JUNTA EXTRAFINA with 1,50-1,60 l per bag (5Kg) of clean water until a homogeneous, creamy and lump-free paste  is obtained. The amount of mixing water can be adapted in order to facilitate the application; however, an excess of mixing water may cause a visible shrinkage of the grout. Let the mix stand for 5 minutes before application.

Fill the joints completely using the appropriate trowel or rubber float, making sure the joints are completely compacted, with no unevenness. Remove excess of BEYEM JUNTA EXTRAFINA, while still fresh, from the surface moving the float diagonally across joints.

When the mixture loses its plasticity and becomes matt, clean excess of grout mortar with a damp hard cellulose sponge  or rubber float working diagonally to the joints.  If cleaning is carried out too early (when the mixture is still plastic), the grout may be dragged from the joint leading to color variation. On the other hand, if the grout has already hardened, it is necessary to clean the surface mechanically, which could scratch the surface of the tiles.

Cautions and recommendations
  • Do not apply on plastic, metal or wood.
  • Do not apply below 5ºC or above 30ºC.
  • Do not apply when there is  risk of frost, rain, strong wind or direct sunlight.
  • When applying BEYEM JUNTA EXTRAFINA in extremely hot, dry or windy days, it is recommended  to wet the joints after several hours.
  • In outdoor, joins should be protected from rain until completely drying of grout mortar.
  • Adhesive should normally be left for at least 24-48 hours before grouting.
  • Use BEYEM DESIN  to clean up stained tiles (wait at least 15 days after application) . Make sure the product does not damage the tile. Do not use on grouted joints.
  • If the grout is required to be completely impervious to water  or chemically resistant, use BEYEM JUNTA EPOXY.
  • For tile joints larger than 4 mm, use BEYEM JUNTA UNIVERSAL.
  • For renovation of damaged joints, a minimum depth before applying must be ensured.
Technical data

Product identity. Properties of mixture and application data

Appearance

Powder

Color

Colour Chart

Bulk density

≈ 920 Kg/m3

Density of the mix

≈ 1840 Kg/m3

Mixing water,% 

30-32 %

Pot life

≤ 1 h

Waiting time for finishing

10-60 min

Foot traffic

24 h

Ready for use

72-96 h

Width of joints

Up to 4 mm

Coverage

It depends on size of tile and joint

 

[(A+B)/(A×B)]×C×D×1,75

 

A: length of tile, mm

B: width of tile, mm

C: thickness of tile, mm

D: width of joint, mm

Tariff code

3824.50.90.00

Final performances

 

Type

CG2 AW

Abrasion resistance

<  1000 mm3

Flexural strength after dry storage

>  2,5 N/mm2

Flexural strength after freeze-thaw cycles

>  2,5 N/mm2

Compressive strength after dry storage

>  15,0 N/mm2

Compressive strength after freeze-thaw cycles

>  15,0 N/mm2

Shrinkage

< 3 mm/m

Water absorption after 30 min

< 2 g

Water absorption after 240 mm

< 5 g

COVs  totales  (28 dias )

≤ 500 µg/m3

Packaging

BEYEM JUNTA EXTRAFINA is packed 25 kg plastic lined paper bags and  4x5 kg boxes.

Storage:  when stored unopened in a cool dry place, shelf life is 12 months from date of manufacture.

Cleaning tools

Tools can be cleaned easily with water  before the product hardens. Hardened product can be remove only mechanically.

Project specification

Extra-fine and hygienic grouting of ceramic and porcelain tiles, marble or natural stone, must be carried out with a  Sanitized® protected, fast drying, high abrasion resistance and  low water uptake tile grout mortar  compliant with EN 13888 - class CG2 AW, such as Beyem Junta Extrafina manufactured by Rodacal Beyem company. Joints must be free from traces of adhesives and flaky parts. Use a spreader or hard rubber float to apply the joint grout and suitable sponges and clean water to clean joints on completion. Joints of ____ mm width and tiles ____ x ____ cm in size will lead to an average coverage of ≈ ____ kg/m2. Existing joints must be respected and elastic fractionizing and perimeter joints must be created. 

Health and Safety

For further and complete information about the safe use of our product please refer to our latest version of the Safety Data Sheet, which is available upon request.

Disposal of the product and packaging must be in accordance with current legislation. This is  responsibility of the final product user.

Certifications

Technical Data Sheet

Ficha de Seguridad

Certificate of Factory Production Control

Declaración Compuestos Orgánicos Volátiles

Certificate of Quality Management System ISO 9001

Certificate of R+D+i Management System UNE 166002

Up Send to a friendSend to a friend Go backGo back

Ctra. Madrid-Alicante, Km. 213 (Extramuro)
02630 La Roda - Albacete (España)
Telephone 1: 967 440 018 Fax: 967 442 474
E-Mail: rodacal@rodacal.com

Web Design and Development Im3diA comunicación
This website is optimized for browsers Chrome, Internet Explorer 9 and Firefox 4.0.